Forums » News and Announcements

Drill bit specifications are complete

  • August 19, 2022 11:55 AM +05

    Original title: The specifications of the drill bit are complete, and the arrangement is too complete. Drill is a tool used to drill through holes or blind holes in solid materials and to ream existing holes. The commonly used drill bits are twist drill, flat drill, center drill, deep hole drill and trepanning drill. It is customary to classify reamers and counterbores as drill bits, although they cannot make holes in solid material.
    The specifications of various drill bits are shown in the table below Drill size 180 degrees Specification Small diameter Large diameter Full length Small diameter Blade Long handle diameter M33.46.565136.5 M44.58.075188 M55.59.585229.5 M66.611.0902511 M89.014.01002812 M1011.017.51103012 M1214.020.01153212 1/46.8511.0902511 5/168.5514.01002812 3/810.115.01103012 1/213.520.01153212 Drill size 90 degree Specification Small diameter Large diameter Full length Small diameter Blade Long handle diameter M33.46.465356.4 M44.58.475428.4 M55.510.4855010.4 M66.612.5905312.0 M89.016.51005312.0 Drill size 180 degrees Specification Small diameter Large diameter Full length Small diameter Blade Long handle diameter M33.46.565136.5 M44.58.075188 M55.59.585229.5 M66.611.0902511 M89.014.01002812 M1011.017.51103012 M1214.020.01153212 1/46.8511.0902511 5/168.5514.01002812 3/810.115.01103012 1/213.520.01153212 Drill size 90 degree Specification Small diameter Large diameter Full length Small diameter Blade Long handle diameter M33.46.465356.4 M44.58.475428.4 M55.510.4855010.4 M66.612.5905312.0 M89.016.51005312.0 Bit outer diameter bit length bit outer diameter bit length φ20mm350mmφ102mm350mm/420mm φ22mm350mmφ108mm350mm/420mm φ24mm350mmφ110mm350mm/420mm φ26mm350mm/420mmφ114mm350mm/420mm φ28mm350mm/420mmφ120mm350mm/420mm φ30mm350mm/420mmφ127mm350mm/420mm φ32mm350mm/420mmφ132mm350mm/420mm φ38mm350mm/420mmφ150mm350mm/420mm φ40mm350mm/420mmφ159mm350mm/420mm φ44mm350mm/420mmφ166mm350mm/420mm φ50mm350mm/420mmφ180mm350mm/420mm φ57mm350mm/420mmφ200mm350mm/420mm φ63mm350mm/420mmφ220mm350mm/420mm φ76mm350mm/420mmφ250mm350mm/420mm φ83mm350mm/420mmφ275mm350mm/420mm φ89mm350mm/420mmφ300mm350mm/420mm Drill size 180 degrees Expand the full text Specification Small diameter Large diameter Full length Small diameter Blade Long handle diameter
    M33.46.565136.5 M44.58.075188 M55.59.585229.5 M66.611.0902511 M89.014.01002812 M1011.017.51103012 M1214.020.01153212 1/46.8511.0902511 5/168.5514.01002812 3/810.115.01103012 1/213.520.01153212 Drill size 90 degree Specification Small diameter Large diameter Full length Small diameter Blade Long handle diameter M33.46.465356.4 M44.58.475428.4 M55.510.4855010.4 M66.612.5905312.0 M89.016.51005312.0 Specification table for center bit Blade diameter (d) Blade diameter tolerance Blade length (L2) Shank diameter (D) Overall length (L) 0.40.05-0.050.53.031 0.50.05-0.050.63.031 0.60.05-0.050.73.536 0.70.05-0.050.83.536 0.80.05-0.050.94.036 0.90.05-0.051.04.036 1.00.05-0.051.24.036 1.24.0100 1.20.05-0.051.45.042 1.50.05-0.051.85.042 1.85.0100 1.85.0150 1.85.0200 2.00.08-0.082.45.042 2.46.0100 2.46.0150 2.46.0200 2.50.08-0.083.06.047 3.08.0100 3.08.0150 3.08.0200 3.00.08-0.083.67.757 3.610.0100 3.610.0150 3.610.0200 3.20.08-0.083.87.757 4.00.08-0.084.810.069 4.810.0100 4.810.0150 4.810.0200 5.00.12-0.126.011.069 6.012.0100 6.012.0150 6.012.0200 6.00.12-0.128.016.090 8.00.12-0.1210.018.0100 10.00.12-0.1212.018.0100 12.00.12-0.1215.022.0110 High-speed steel hollow drill bit, also known as core drill bit or hole opener, drill bit classification: high-speed steel drill bit, hard alloy drill bit, tungsten steel drill bit; cutting depth: 35MM, 50MM, 100M; suitable for drilling machine: imported magnetic seat drill, magnetic drill,overburden drilling systems, domestic magnetic seat drill, magnet drill, magnet drill, steel plate drill, magnetic drill,down the hole bit, machine tool, bench drill, seat drill and so on
    Diameter specification: 12mm to 100mm; the main material of drill bit is high-speed steel. Powder metallurgy; Cemented carbide. The axis of the drill bit shall be inclined at an angle of 60 ° to the grinding wheel surface. This angle is the point angle of the drill. If the angle is not correct, it will directly affect the size of the point angle of the drill, the shape of the main cutting edge and the bevel of the chisel edge. This refers to the position relationship between the axial line of the drill bit and the surface of the grinding wheel. It is OK to take 60 °, which is generally more accurate. Attention shall be paid to the relative horizontal position and angle position of the drill before sharpening. The two positions shall be considered as a whole. Do not neglect to set the angle for the sake of setting the cutting edge, or neglect to set the cutting edge for the sake of setting the angle. The greater the ratio of the length to the diameter of the drill bit, the greater its tendency to bend. The bending force can be reduced by reducing the length-diameter ratio, thereby avoiding the breakage of the drill bit and the increase of the hole diameter error. Deeper holes require drill sizes with larger length to diameter ratios. Usually, a hole with a depth of more than three times the diameter is a "deep hole", DHD Drill bit ,mining dth bit, and the depth of a micro-drill generally exceeds this limit. Specification of electric hammer bit: 6mm, 8mm X 110mm; 8mmx160mm; 8mm,10mm,12mmx210mm,10mm,12mm,16mm,20mmx450mm。 The main body of the hard alloy electric hammer drill is made of high-quality alloy steel, and the tool bit is welded with hard alloy. Used together with various electric hammers, suitable for drilling on hard building materials such as concrete, brick, etc. It is a widely used and highly efficient punching tool in the construction and installation industry. Specification of electric hammer bit set: 5110mm × 6 Specification of electric hammer bit set: 5110mm, 6110mm, 6160mm, 8160mm, 10160 mm Round shank and square shank of electric hammer bit 6MM 8MM 10MM 12MM 14MM 16MM-28MM is Through-wall drill length 350 MM 16MM 18MM 20MM 22MM 25MM 28MM Drill bit type A. Classification by structure (1) Integral drill bit: the drill top, the drill body and the drill shank are integrally made of the same material. (2) End welding type drill bit, the drill top part is welded by carbide. B. Classification by drill (1) Straight shank drill bit: the drill bit diameter is less than ψ 13.0. Below mm, straight shanks are used. (2) Taper shank drill bit: the shank of the drill bit is tapered, and generally its taper is Morse taper. C. Classified by use (1) Center drill bit: It is generally used to drill the center point before drilling. The front conical surface is 60 °, 75 °, 90 °, etc. In order to use the tailstock to support the lathe during operation, the 60 ° center drill bit should be matched with the lathe tailstock center at 60 °. (2) Twist drill bit: It is the most widely used drill bit in industrial manufacturing, and we generally use twist drill bit. (3) Superhard drill bit: The front end of the drill body or all of it is made of superhard alloy tool material, which is used for drilling and processing materials. (4) Oil hole drill bit: The drill body has two small holes through which the cutting agent reaches the cutting edge to take away heat and chips. With this drill bit, the workpiece is generally rotated while the drill bit is stationary. (5) Deep-hole drill bit: It was first used for the drilling of gun barrels and stone barrels, also known as gun barrel drill bit. The deep hole drill is of a straight flute type, and a quarter of a strong portion is cut off in a circular tube to produce chip removal at the cutting edge. (6) Drill bit reamer: In order to meet the needs of mass production, the front end is a drill bit and the rear end is a reamer. The diameter of the drill bit and the diameter of the reamer are only the margin of reaming. There are also drill bits used in combination with screw tapping, so they are also called mixed drill bits. (7) Taper drill: Taper drill can be used when machining the feed inlet of the mold. (8) Cylindrical hole drill: We call it a countersunk end mill. The front end of this kind of drill has a part with a smaller diameter,mining dth bit, which is called the lead. (9) Taper hole drill: It is used for drilling taper holes. Its front end angle is 90 °, 60 °, etc. The chamfering cutter we use is a kind of taper hole drill. Source: Booz UG Programming Studio Return to Sohu to see more Responsible Editor:. wt-dthtools.com

    • 19418 posts
    August 29, 2022 4:23 PM +05

    After research a couple of of the weblog posts in your website now, and I really like your method of blogging. I bookmarked it to my bookmark website record and will probably be checking back soon. Pls check out my site as effectively and let me know what you think. 인천출장안마

    • 19418 posts
    August 30, 2022 3:53 PM +05

    Having been simply looking at useful blog articles with regard to the project research when My partner and i happened to stumble on yours. Thanks for this practical information! ลิปสติก

    • 19418 posts
    August 30, 2022 10:03 PM +05

    Someone necessarily assist to make critically articles I’d state. This is the first time I frequented your web page and thus far? I amazed with the analysis you made to make this actual submit incredible. Excellent activity! https://kubett.vip

    • 19418 posts
    September 1, 2022 1:18 PM +05

    Along with the whole thing which appears to be developing within this particular subject material, all your points of view are actually very exciting. Nonetheless, I beg your pardon, but I do not subscribe to your entire plan, all be it radical none the less. It looks to me that your commentary are not totally justified and in actuality you are generally yourself not even wholly certain of your argument. In any case I did enjoy reading it. สมัคร บาคาร่า

    • 19418 posts
    September 1, 2022 2:41 PM +05

    Bonjour Sachez que les idées de l’ sujet necessiteraient d’autres avis: Cette opinion est défendable cependant je n’approuve pas les divers posts postés ici. Vous pourriez vérifier certaines valeurs pour etre plus rigoureux… Contactez moi au besoin Brew Monkey Biersorten Auslaufhahn

    • 19418 posts
    September 3, 2022 8:19 PM +05

    Top post Genachowski’s less than artful weaving of net neutrality and consumer privacy | Law and Politics of Broadband you’ve surely influenced all of us FYI have you read Middle East amazing headlines! Enjoy your day ! Flash Website Design 안양출장안마

    • 19418 posts
    September 4, 2022 11:21 AM +05

    Most what i read online is trash and copy paste but i think you offer something different. Keep it like this. lifeguard recertification

    • 5 posts
    September 6, 2022 3:27 PM +05

    I cannot wait to dig deep and kickoff utilizing resources that I received from you. Your exuberance is refreshing.

    SharePoint Development

    • 19418 posts
    September 7, 2022 5:45 PM +05

    Wow, you seem to be very knowledgable about this kind of topics.’.-.: SEO resultaat met 100% geld terug garantie!

    • 19418 posts
    September 9, 2022 2:51 AM +05

    Some genuinely fantastic posts on this internet site , thankyou for contribution. payment processing agent

    • 19418 posts
    September 9, 2022 4:40 PM +05

    you can also give your baby some antibacterial baby socks to ensure that your baby is always clean` Cocaine For Sale

    • 19418 posts
    September 9, 2022 8:57 PM +05

    I am so happy to read this. This is the kind of manual that needs to be given and not the random misinformation that’s at the other blogs. Appreciate your sharing this greatest doc. Klik hier Bestel boek over een bepaald hondenras

    • 19418 posts
    September 10, 2022 11:34 PM +05

    Dental implants Mexico The next occasion I read a weblog, Hopefully that this doesnt disappoint me as much as this one. Come on, man, Yes, it was my choice to read, but When i thought youd have some thing fascinating to express. All I hear can be a number of whining about something you could fix should you werent too busy in search of attention.

    • 19418 posts
    September 12, 2022 8:38 PM +05

    The the next occasion I just read a blog, Hopefully that this doesnt disappoint me up to this. I am talking about, It was my method to read, but I really thought youd have something interesting to express. All I hear can be a number of whining about something that you could fix should you werent too busy looking for attention. packers and movers in kalkaji

    • 19418 posts
    September 13, 2022 1:40 PM +05

    This website may be a walk-through its the details it suited you with this and didn’t know who to inquire about. Glimpse here, and you’ll undoubtedly discover it. Upskill talent

    • 19418 posts
    September 13, 2022 4:49 PM +05

    Thanks for the sensible critique. Me and my neighbor were just preparing to do some research on this. We got a grab a book from our local library but I think I learned more from this post. I’m very glad to see such fantastic information being shared freely out there. podolog białystok

    • 19418 posts
    September 14, 2022 5:22 PM +05

    I think your blog is getting more and more visitors.,:”~, gosc.pl

    • 19418 posts
    September 15, 2022 2:04 PM +05

    But wanna remark on few general things, The website design and style is perfect, the subject matter is very superb : D. fix leak

    • 19418 posts
    September 15, 2022 5:47 PM +05

    we spceially choose crib beddings with padded foams because it is much more comfortable to use. 300 gallon water tank

    • 19418 posts
    September 18, 2022 9:13 PM +05

    You made some decent points there. I looked over the internet for that problem and located most people is going in conjunction with with the website. Christian Facebook cover photos

    • 19418 posts
    September 22, 2022 3:25 PM +05

    I do not harbor which i couldn’t eliminate other individuals’ errors when it come to. Best iso agent program

    • 17957 posts
    September 27, 2022 6:57 PM +05

    I see something really interesting about your web site so I saved to bookmarks . แทงบอลออนไลน์

    • 17957 posts
    September 28, 2022 12:25 AM +05

    After study some of the websites with your web site now, we truly as if your technique for blogging. I bookmarked it to my bookmark site list and will be checking back soon. Pls look into my website also and told me what you consider. backlinks

    • 19418 posts
    September 30, 2022 7:06 PM +05

    Hey dude, what kind of wordpress theme are you using? i want it to use on my blog too . https://dynamichealthstaff.com/staff-nurse-vacancy-in-dubai