Recent Entries

• China Plastic Bucket Mould Factory Introduces The Use Of Mold B

  by rixiang alex January 12, 2022
    China Plastic Bucket Mould Factory introduces the role of common mold base parts: 1.Fixed die base plate (panel): fix the front die on the injection molding machine.2.Runner plate (nozzle plate): When the mold is opened, remove the waste handle and make it fall off automatically (three-plat...

• 20L Pail Mould Suppliers Introduces The Strategy Of Using Plast

  by rixiang alex December 22, 2021
    The working conditions of plastic molds are different from those of cold stamping dies. Generally, they must work at 150 degrees Celsius to 200 degrees Celsius. In addition to being subjected to a certain pressure, they also have to withstand temperature. According to the different use condi...

• Paint Pail Mould Manufacturers Introduces The Application Knowl

  by rixiang alex December 8, 2021
    Paint Pail Mould Manufacturers introduces that the mold processing factory has its own injection molding processing, injection molding processing, and oil spray screen printing. The products are widely used in home appliances, automobiles, medical care, communications, consumer electronics a...
  comments

• Paint Pail Mould Suppliers Introduces The Knowledge Of Plastic

  by rixiang alex November 24, 2021
    Paint Pail Mould Suppliers introduced that shrinkage in plastic processing is one of the most common problems in plastic processing. For plastic products that require high surface quality, shrinkage is even more difficult. Therefore, with the continuous improvement of plastic processing tech...

• 18l Pail Mould Manufacturers Introduces The Manufacturing Requi

  by rixiang alex November 10, 2021
  18L Pail Mould Manufacturers introduces how to make a turnover box mold? First, select the right steel material for the mold base and mold core cavity. For example: to produce a pair of turnover box molds with four out of four, you must use pre-hardened steel material with a hardness higher th...

• Plastic Degradation Affects The Plastic Pail Mould Color Tone

  by rixiang alex September 16, 2021
  　　What are the reasons for the large surface roughness and lack of gloss in the processing of Plastic Pail Mould products? Next, Jimei Mold Factory will give you a good analysis from the aspects of mold processing equipment, injection molds, plastic molds, mold processing technology and raw mat...

• Custom Plastic Parts Injection Bucket Mould Service

  by rixiang alex September 2, 2021
  　　Expert Plastic Injection Molding Capacity 　　Custom plastic parts injection molding service provided by our Bucket Mould Manufacturer is reputed among customers. As that our Mould has been manufactured Custom Plastic Mold since 2000. We excel at such popular projects as home appliance, plasti...

• Amount Of Bucket Mould Colorant

  by rixiang alex August 19, 2021
  　　There are many synthetic polymers available today, each with its own unique properties. Some are more impact-resistant than others, some have more UV resistance, and some bend more rather than break. Anyone starting a custom plastic Bucket Mould Manufacturer project should have initial discus...

• Some Key Points Of Folding Box Bucket Mould

  by rixiang alex August 5, 2021
  　　Plastic folding boxes have a very wide range of applications in daily life and logistics turnover. More and more companies and individuals have begun to choose them to place or transport various items. We specialize in manufacturing various types of plastic folding box Bucket Mould Manufacturer, i...

• Packed Bucket Moulds Are Fast Moving Consumer Goods

  by rixiang alex July 22, 2021
  　　Nowadays the fast-moving consumer goods are having good market. For the fast-moving consumer goods, which products will appear in your mind? In my mind--plastic thinwall packed box. But do you know how does it produce? Then let we talked about the plastic thinwall packed Bucket Mould Manufacturer....

• Making The Major Decision Of Partnering With Bucket Mould

  by rixiang alex July 8, 2021
  　　In a world full of Bucket Mould Manufacturer, it might become tiresome to decide on which company to partner with. Most of these companies offer almost the same services, creating a dilemma for you and your team to settle on one. However, as much as the services may be similar, the distinction com...

• The Normal Production Of Two- Color Bucket Mould

  by rixiang alex June 10, 2021
  　　A two-color mold is a mold in which two plastic materials are injected on the same injection molding machine in two moldings. It is usually composed of two sets of molds. The rear mold must be rotated 180 degrees, while the front mold does not move, but the product is only ejected once. Generally,...

• The Principle And Composition Of Bucket Molds In Injection Mold

  by rixiang alex May 27, 2021
  　　Injection molds are parts that give plastic shapes and dimensions during molding. Although the structure of the mold may vary widely due to the variety and performance of plastics, the shape and structure of plastic products, and the type of injection machine, the basic structure is the same. 　　T...

• A Variety Of Bucket Mould Manufacturing

  by rixiang alex May 13, 2021
  　　Plastics are the most common materials for producing end-use parts and products, for everything from consumer products to medical devices. Plastics are a versatile category of materials, with thousands of polymer options, each with their own specific mechanical properties. But how are plastic part...

• A Variety Of Bucket Mould Manufacturing

  by rixiang alex May 13, 2021
  　　Plastics are the most common materials for producing end-use parts and products, for everything from consumer products to medical devices. Plastics are a versatile category of materials, with thousands of polymer options, each with their own specific mechanical properties. But how are plastic part...

• The Role Of Bucket Mould Manufacturer Flow Analysis

  by rixiang alex April 8, 2021
  　　Have you ever encountered such a situation where a set of molds were tried repeatedly, but they just couldn’t figure it out. These problems were changed, and other problems occurred, such as changing the gate position, changing the runner gate size, and modifying the product. To meet the mol...

• The Different Materials Of Plastic Injection Molding

  by rixiang alex April 1, 2021
  　　One of the most important aspects of any product development project using Plastic Pail Moulding is choosing the right material, as it directly affects the molding operation and also the part performance. There are thousands of plastic materials available in the market. So, how do you make sure yo...

• How To Choose A Bucket Mould Product Design Firm

  by rixiang alex March 11, 2021
  　　If you have an innovative Bucket Mould product idea, chances are you probably need someone to help it come to life… 　　This is where product design firms come in. 　　These companies will help you turn your idea into a quality, cost effective design and get your product onto the market ...

• 20L Bucket Mould Requirements

  by rixiang alex January 21, 2021
  　　The 20L Bucket Mould seems very simple; actually there are many factors to consider. 　　Plastic bucket mold cooling system design: The design of the cooling system is a relatively complicated work. We need consider the cooling effect and the uniformity, as well as the influence of the cooling...

• Paint Pail Mould Cavities and Cores

  by rixiang alex January 14, 2021
  　　The cavity and core give the Paint Pail Moulding its external and internal shapes respectively, the impression imparting the whole of the form to the molding. We then proceeded to indicate alternative ways by which the cavity and core could be incorporated into the mould and found that these alter...

• Traditional Daily Plastic Pail Mould Lose Its Obvious Advantage

  by rixiang alex December 31, 2020
  As the basic industry of the national economy,daily Plastic Pail Mould nvolves various industries such as machinery,automobile,light industry,electronics,chemical industry,metallurgy,building materials,etc.,and its application range is very wide. 　　With the continuous development of informatio...

• How to Use Hot Runner Balance in Pail Mould Qualification

  by rixiang alex December 17, 2020
  When we are using a valve gate system and have visual defects like gate burns or flow marks, how can we resolve this problem? 　　How do the balance numbers of a hot runner system compare to a cold runner system in Pail Mould? 　　Does adjusting nozzle temperature help with balance in valve-gated syst...

• What Should We Avoid When Product Injection Pail Mould

  by rixiang alex December 3, 2020
  　1. Die opening direction and parting line 　　At the beginning of the design of each injection moulding product, the mould opening direction and parting line should be determined first, so as to minimize the core-pulling slider mechanism and eliminate the influence of parting line on appearance. 　　...

• Steel Material Of Barrel Mould

  by rixiang alex October 23, 2020
  What kind of steel is most suitable for Paint Bucket Mould? In fact, the steel used for the mold depends on the material of the product and the number of molds required by the customer. Because some materials are corrosive, it is necessary to select corrosion-resistant steel for special treatme...

• Paint Treatment Of Paint Bucket Mould

  by rixiang alex October 16, 2020
  After using the paint Bucket Mould at home, what should I do if there is residual paint on the floor? Generally, gasoline is used. Dip cotton yarn directly into the appropriate amount of gasoline and apply it directly to the area to be wiped for 5-10 seconds, and then wipe it. Use a cotton ...